No-dig drain repairs · South East England · Open 24/7

Drain Relining and Patch Repairs Without Digging

Drain relining repairs a cracked, leaking or root-damaged pipe from the inside. We fit a resin-soaked liner through an existing manhole, press it against the old pipe and let it set hard, so you get a new pipe inside the old one without a trench across the garden. We do short patch repairs and full relining across South East England, with a fixed price agreed before any work starts.

No dig
Through existing manholes
Fixed
Price agreed first
890+
Customer reviews
24/7
Phones answered
Cracked clay drain channel at the bottom of an inspection chamber 5.0 on Google · 9.76 on Checkatrade
Patch or reline

Patch Repairs and Full Relining: What's the Difference?

A patch repair is a short liner fitted over one defect: a single crack, a joint that has slipped, or the spot where roots have got in. The rest of the pipe stays as it is. When the damage is in one place, it's the smallest and quickest fix.

Full relining covers the whole length of pipe between two manholes. We use it when there are several cracks or leaking joints along the run, or when an old pitch fibre pipe has started to break up. Pitch fibre that has gone oval is re-rounded first, then lined.

Both use the same method, known as CIPP (cured-in-place pipe): a liner soaked in resin that sets hard inside the old pipe. It seals the joints, so roots and groundwater can't get back in through them.

Cracked clay pipe joint at the bottom of an inspection chamber
Signs to look for

Signs Your Drain Needs a Repair, Not Just Clearing

Clearing a blockage deals with the symptom. When one of these keeps happening, the pipe itself is usually damaged.

It blocks in the same place

If the drain clears and then blocks again within a few months, waste is catching on a crack or a slipped joint.

Roots in the manhole

Roots in a manhole, or in the waste we pull out, have got in through a joint. Cutting them out only lasts until the joint is sealed.

Damp patches or sinking ground

A leaking drain washes soil away. Look for wet patches, dips in the lawn or paving that sinks along the line of the drain.

A smell that comes back

A sewage smell in the garden that returns after the drain has been cleaned often means a pipe is leaking into the ground.

Rats in the garden or house

Rats get into houses through broken drains. A cracked pipe is one of the first things to check when they keep coming back.

Water going missing

When we flow test, the water that goes in at one manhole should all arrive at the next. If less arrives, it's leaking out on the way.

Step by step

How We Patch and Reline a Drain

We trace the damage first, then fit the smallest repair that will last.

  1. 1

    Trace the fault

    We lift the manholes, rod the run and measure how far in the rods snag or catch on roots. Flow tests from each fitting show where water backs up or goes missing, which narrows the damage down to a section of pipe.

  2. 2

    Agree a fixed price

    We tell you whether a patch, full relining or a dug repair is the right fix, and agree one fixed price before we start.

  3. 3

    Clean the pipe

    A liner needs a clean surface to bond to. We jet the drain, cut out roots and strip back scale first.

  4. 4

    Line, cure and test

    The resin-soaked liner goes in on an inflatable packer from the nearest manhole and is held against the pipe until it sets. Then we flow test the run and clean up.

When lining won't work

When a Drain Can't Be Relined

A liner needs a pipe that still holds its shape. If a section has collapsed, is crushed flat or has dropped well out of line, the liner has nothing to form around. In that case we dig down and replace that section with new plastic pipe.

We'll tell you which fix your drain needs, and why, before any work starts.

Our drain repairs page covers dig-down replacement and the other repair methods we use. Our guide to collapsed drain repair costs explains what goes into the price.

New plastic drain pipe fitted inside an inspection chamber after a repair
Fixed price

What Affects a Relining or Patch Repair

Every damaged drain is different, so we trace the fault before we price it. These are the things that decide your fixed price.

What we look atWhy it changes the job
Patch or full lengthOne patch over a single crack is a smaller job than relining the whole run between two manholes.
Number of defectsSeveral cracks or leaking joints close together are often better lined in one length than patched one at a time.
Pipe size and bendsMost house drains are 100mm. Larger pipes, bends and junctions change the liner we use and the time it takes.
AccessWe work from existing manholes. If there isn't one near the damage, we may need to open up access first.
Cleaning firstHeavy roots or scale have to come out before the liner goes in, which adds time to the job.
Pipe materialPitch fibre that has gone oval is re-rounded before lining. A section that has collapsed has to be dug out and replaced.

No standard call-out fee, with any emergency or out-of-hours charge agreed before attendance. You get a fixed price before any work starts.

"Fixed a crack in the drain pipe, was happy with the service and professionalism. Would recommend thank you"

Ravi Patel, Google review, August 2026

Coverage

Drain Relining and Patch Repairs Near You

We repair drains across South London, Surrey, Kent and Sussex from our base on Brighton Road in Purley. Find your area below.

Not on the list? We still cover it. Call or message us to check.

FAQs

Drain Relining: Your Questions Answered

What is drain relining?

Drain relining repairs a damaged pipe from the inside. A liner soaked in resin goes in through an existing manhole, is pressed against the old pipe and sets hard, leaving a new pipe inside the old one. It's also called no-dig repair or CIPP lining (cured-in-place pipe).

What's the difference between a patch repair and relining?

A patch repair lines a short section over one defect, such as a crack, a slipped joint or a root entry point. Full relining lines the whole run from one manhole to the next. We use a patch when the damage is in one place and full relining when it's spread along the pipe.

How do you find where the pipe is damaged?

We lift the manholes, rod the run and measure how far in the rods snag or catch on roots. We also flow test from each fitting to see where water backs up or goes missing. That narrows the damage down to a section of pipe before we agree the fix.

How much does drain relining cost?

It depends on whether you need a single patch or a full length, the pipe size, the number of bends and how much cleaning the pipe needs first. We trace the fault, then agree one fixed price before any work starts. There's no standard call-out fee, and any emergency or out-of-hours charge is agreed before we attend.

Can every damaged drain be relined?

No. A liner needs a pipe that still holds its shape. If a section has collapsed, is crushed flat or has dropped well out of line, we dig down and replace it instead. We'll tell you which fix your drain needs before we start.

Will relining stop tree roots getting back in?

Roots get into drains through joints and cracks. We cut the roots out first, then line the pipe, and the liner seals the joints they were using. If a tree is very close to the drain, we'll tell you so you can keep an eye on it.

Fixed quote

Get a Fixed Price for Your Drain Repair

Tell us what's happening and your postcode. We'll call you back, trace the fault and agree a fixed price before any work starts.

  • No standard call-out fee
  • Fixed price agreed before work starts
  • Open 24/7, including bank holidays

Need us now? Call 07771 200075 or message us on WhatsApp.

Priority Booking
Patch repairs and relining

Drain Keeps Blocking or Leaking?

Call us, or send a WhatsApp message with your postcode and what's happening. We'll trace the fault and agree a fixed price before any work starts, with no standard call-out fee.

Open 24/7, including bank holidays · Brighton Rd, Purley CR8 2BA

Call 07771 200075 WhatsApp